[DLTX] Specifications

Full technical specifications for the Deity THEOS DLTX digital wireless bodypack transmitter, covering RF transmission, transmitter audio, the timecode reader and generator, internal recording, power, and physical dimensions. All data are measured by DEITY Audio Lab and are subject to the physical data.

DLTX Transmit

RF Modulation	Proprietary Digital RF Modulation
RF Freq Ranges	Allocated per region, using the legal frequency bands that meet local conditions
RF Frequency Step	100kHz
Minimum Frequency Spacing	700kHz
Antenna Connector	50 Ohm SMA
Power Output	10 / 20 / 25 / 50mW / 100mW, software selectable (varies by regulation)

Transmitter Audio

Dynamic Range	123dB
Distortion	Less than 0.5%
Frequency Response	20Hz to 20kHz
Low Cut	OFF / 75Hz / 100Hz / 150Hz
Mic Power	MIC-5V, MIC-48V, LINE
Mic Connector	Lemo 3-Pin
Input Gain	0 to +30dBu
ADC Bit-Depth	2 x 24 bit
ADC Sampling-Rate	48kHz

Timecode Reader / Generator

Clock Accuracy	0.25 PPM (1 frame out in 48 hours)
Timecode Type	LTC (SMPTE)
Timecode Frame-Rates	23.98, 24, 25, 29.97, 29.97DF, 30, 30DF

Internal Recording

Media	MicroSD Card (Flash Memory)
File Format	.wav
Sample Rate	48kHz
Record Format	24-bit / 32-bit float

Power

Battery Life

Up to 12+ hours with 2 Lithium AA

Physical

Dimensions (H x W x D)	88.45 x 65 x 17.8 mm
Weight	Without battery and antenna: 88g. Without battery, with antenna: 93g. With battery and antenna: 125g.
Operating Temperature	-20°C to 45°C (-4°F to 113°F)
Storage and Transportation Temperature	-30°C to +60°C (-22°F to +140°F)

Note: Illustrations and figures are for reference only. Because the product is under continuous development, if there is any difference between the product and this specification, please refer to the product itself.