[SRD-Mini] Specifications
Full technical specifications for the Deity SRD mini RF splitter, including frequency range, gain, impedance, power, and dimensions.
Full technical specifications for the Deity SRD mini RF splitter. All data was measured by DEITY Audio Labs and should be taken as reference against actual product data.
Specifications
| Frequency range | 470MHz to 1GHz |
| Gain | +3 to +9 dB |
| Port isolation | Greater than 20 dB (minimum) |
| Input impedance | 50 ohms |
| Output impedance | 50 ohms |
| Maximum input signal at the front end | +13 dBm |
| Overload signal | 0 dBm |
| Noise figure | Less than 1.5 dB |
| Working voltage | USB-C: 5V DC. HRS4: 12V to 16.8V DC. |
| Working current consumption | Less than 160 mA (HRS4) |
| Shell material | Aluminum alloy |
| RF input interface | BNC |
| RF output interface | SMA |
| Size | 115.5 x 78 x 20.8 mm |
| Weight | 185.5 g |
All the above data was measured by DEITY Audio Labs and should be based on the actual product data. Illustrations in the manual are for reference only. Due to continuous product development, if there are differences between the product and the illustrations, please refer to the product itself.