This page lists the full technical specifications for the DEITY S-Mic 3S short shotgun condenser microphone, along with its frequency-response and polar-pattern charts. All data are measured by the DEITY audio laboratory and are subject to the physical data of the product.
Frequency Response
Measured at 0dB ≤ 25mV/Pa (-32dBV). The S-Mic 3S holds a broadly flat response across its 50 Hz to 20 kHz range.
Polar Pattern
The S-Mic 3S uses a super-cardioid pickup, plotted here at 500 Hz, 1000 Hz, 2000 Hz, 8000 Hz, and 16000 Hz.
Performance Parameters
| Polar Pattern | Super-Cardioid |
| Maximum SPL | 130dB SPL (@1kHz, 1% THD into 1kΩ) |
| Frequency Range | 50 Hz to 20 kHz |
| THD | ≤0.5% |
| Nominal Impedance | 75Ω |
| Min. Terminating Impedance | approx. 800Ω |
| Sensitivity | -32 ±2 dB re 1V/Pa @1kHz |
| Equivalent Noise Level | 12dB (A-weighted) |
| Input Voltage | 24V or 48V phantom powering |
| Current Consumption | <4.5mA |
| Temperature Range | -20℃ to +70℃ |
| Dimensions | φ19 x 148 mm |
| Output | 3-Pin XLR |
| Weight | about 44 g |
The above data are all measured by the DEITY audio laboratory and are subject to the actual data. Illustrations in this article are for reference only. Due to the continuous development of new product versions, if there is any discrepancy between the product and the illustrations, please refer to the product itself.