The DEITY PR-2 is a compact pocket recorder built for run-and-gun sound. It captures 32-bit float audio to a microSD card, carries an internal timecode generator for camera sync, and connects to the Sidus Audio app over Bluetooth for wireless timecode grouping. This guide covers what comes in the box and how to get set up for your first recording.
What's in the Box
Your PR-2 package includes:
- PR-2 pocket recorder (1 pc)
- Recorder belt buckle (1 pc)
- W. Lav Pro lavalier microphone with 3.5mm TRS connector (1 pc)
- USB-C to USB-C cable (1 pc)
- USB-C to USB-A conversion plug (1 pc)
- DEITY AA battery (1 pc)
- Micro SD card (1 pc)
What the PR-2 Does
The PR-2 is a single-input pocket recorder aimed at professional recordists, journalists, and content creators who need a small, reliable capture device. Key highlights:
- 32-bit float and 24-bit recording at a 48 kHz sample rate, so you can rescue quiet or loud takes in post.
- Built-in timecode with Free, Auto, Once, and Rec modes, plus A to H sync groups.
- Mic or Line input on a single 3.5mm jack, with an AUTO GAIN option for quick level setting.
- Bluetooth control through the Sidus Audio app for wireless timecode sync across your gear.
- Long runtime from a single DEITY AA battery, with USB-C power and file transfer.
For a full breakdown of the buttons, ports, and indicators, and how to load the microphone, battery, and card, see the setup guide below.
Next Steps
- [PR-2] Hardware & Setup - learn the controls and install the mic, battery, card, and belt buckle.
- [PR-2] Main Interface & Recording - read the screen and start your first take.
- [PR-2] Timecode Settings - keep audio in sync with your cameras.