[Cables] SPD-1 Cables Guide

The Deity SPD-1 cable family carries power (and, on some cables, battery telemetry) from a Hirose-compatible power distributor such as the SPD-1 or Audio Root to the wide range of receivers, recorders, and batteries used on a professional sound cart or bag. Each cable pairs a specific input connector with a specific output connector for a given class of device. This guide lists every SPD-1 cable, its connectors, and the gear it is designed to power.

Hirose 4-Pin Pinout

The Deity Push-Power connector is compatible with the standard Hirose 4-Pin power standard. The pin assignment is:

Pin 1 - Ground
Pin 2 - Data
Pin 3 - Clock
Pin 4 - Voltage

SPD-1 Cable Range

Cable	Connectors	Purpose
SPD-HR3U	4-Pin Push-Power to Triple USB-C	Powers up to three USB-C devices at once from a Hirose distro. Ideal for sound bags with several devices to power.
SPD-HRBATT	4-Pin Push-Power to Smart Battery Cup	Provides both power and battery telemetry data to Hirose 4-Pin devices.
SPD-HRDC	4-Pin Push-Power to 5.5mm Locking DC barrel	Secure locking DC power for most Lectrosonics DC-powered audio devices.
SPD-HRHR	4-Pin Push-Power to 4-Pin Push-Power	Straight Hirose 4-Pin to Hirose 4-Pin power connection.
SPD-HRISO	Inline power isolator (4-Pin to 4-Pin)	Ground-isolated power connection to remove or reduce ground hum, hiss, or whine.
SPD-T4BATT	TA4f to Smart Battery Cup	Designed for 2054 smart batteries, delivering power and telemetry to TA4f devices.
SPD-T4DT	TA4f to D-Tap (P-Tap)	Powers TA4f devices from video batteries within a 12 to 18V range.
SPD-HRT4	4-Pin Push-Power to 4-Pin TA	Hirose distro to TA4 devices, handling the higher amperage that power-heavy devices need.
SPD-HR21	4-Pin Push-Power to 2.1mm DC barrel	Hirose distro to 2.1mm DC barrel-jack devices.
SPD-HR25	4-Pin Push-Power to 2.5mm Locking DC barrel	Hirose distro to 2.5mm locking DC barrel-jack devices.
SPD-HR12V	4-Pin Push-Power to 4-Pin Push-Power, regulated to 12V	Hirose distro to Hirose devices that require a fixed 12V power signal.

Device Compatibility

Match your device to the correct cable using the lists below. When in doubt, confirm the input connector and voltage requirement in your device's manual.

SPD-HR3U (Triple USB-C)

Sony UTX-B40 Transmitter
Sony URX-P40 Receiver
Sony URX-P41D Dual Channel Receiver
Deity Connect DUO-RX
Deity Connect BP-TRX
Deity DBTX
Deity D2RX
Deity TC-1
Zoom F6
Android phones
iPad (USB-C models)

SPD-HRBATT (Smart Battery Cup)

Audio Root eSmart BG-DU, eSmart BG-DU-REG
Audio Root vmDBOX-HRS
Sound Devices MX-HIROSE DC Input Sled
Sound Devices 633, 664, 688
Zaxcom Nova, Nova 2
Zaxcom Deva 24
Zoom F8, F8n, F8n Pro
Zoom F4

SPD-HRDC (5.5mm Locking DC)

Most Lectrosonics DC-powered audio devices, including the SR series of receivers, DSR, M2T, DCR822, DSQD, IFBT4, and the Lectrosonics LTBATELIM battery eliminator.

SPD-HRHR (4-Pin to 4-Pin)

Audio Root eSmart BG-DU, eSmart BG-DU-REG
Audio Root vmDBOX-HRS
Sound Devices MX-HIROSE DC Input Sled
Sound Devices 633, 664, 688
Sound Devices A10-RX A-TA3 Adapter, A10-RX A-XLR
Wisycom MCR54 End Plate
Zaxcom Nova, Nova 2
Zaxcom Deva 24
Zoom F8, F8n, F8n Pro
Zoom F4

SPD-HRISO (Inline Power Isolator)

Same Hirose 4-Pin devices as the SPD-HRHR, plus the Deity SPD-1 distributor itself.

SPD-T4BATT (TA4f Smart Battery Cup)

Deity SPD-1
Sound Devices 833
Sound Devices 888
Sound Devices Scorpio

SPD-T4DT (TA4f to D-Tap)

Video batteries within the 12 to 18V range, including:

Anton Bauer Titan SL 90
Core SWX Hypercore NEO Slim 98Wh
Core SWX Nano, Nano-U98, Powerbase Battery
Fxlion Nano One
IDX BP-U 96Wh, DUO-C98
IndiPRO 98Wh V-Mount
SHAPE BP-U65

SPD-HRT4 (4-Pin to 4-Pin TA)

Sound Devices 833
Sound Devices 888
Sound Devices Scorpio

SPD-HR21 (2.1mm DC)

Lectrosonics UCR411
Lectrosonics UCR401
Lectrosonics UCR211
Lectrosonics UCR201

SPD-HR25 (2.5mm Locking DC)

Lectrosonics SR-series receivers with DC bottom plates
Lectrosonics DCR822
Zaxcom QRX 200
Zaxcom QRX 100

SPD-HR12V (12V Regulated)

Hirose-compatible devices that require a fixed, regulated 12V power signal.